Haw Can I Upload Midi Files in an Ipad

Getting started

A tour of n-Rails Studio

At the starting time opening, n-Rails shows the Start your song menu. Hither y'all can choose among different templates that let y'all get-go your song chop-chop and easily.

The menu lets you choose between 6 ways of getting started:

• Record audio: adds a blank armed sound track to your project to start easily recording your commencement take
• Compose midi: adds a bare midi track to your project. Let'south you choose amid different virtual instruments via the instrument browser
• Create Grooves opens the stride-sequencer midi controller, with which y'all can create beats and grooves in an hands way
• Quick Groove adds a pre-composed midi groove to your project. You tin can cull amidst unlike genres and styles of pulsate and bass grooves
• Play Keyboard opens the screen midi keyboard to start play virtual instruments
• Interact connects you lot into the Music collaboration social network created by the n-Track Squad in which you tin discover other musicians to jam with, or interact on others' songs

To start your song from scratch, without using a template, just close the menu.

The Transport bar

The send toolbar contains the ship control to navigate the vocal, play, start recording and using the playback loop office.

Starts recording on the currently armed runway(s).

Sets the timeline cursor to aught. During play, restars playback from the project'southward beginning.

If active, loops playback of the timeline selection. To using it you need to highlight a part past cartoon with your fingers on the timeline axis, activate the loop functions and tap the play button to listen to the highlighted timeline selection. For more info about how using the loop timeline axis, please see our video tutorials.

The primary Toolbar

The main toolbar is a scrollable surface area that contains the most important functions of n-Rails Studio. This is your control console. Here you lot'll find all yous need to compose your songs.

To save your project or open a new one, modify settings, export midi or mixing down your song, import audio and midi files. .

Opens a menu with the following options:

• Share online: Uploads your song to the Songtree music collaboration community, and lets you share information technology via a link. You can optionally allow others notice your song and collaborate on it.


• Share Song by Email: Exports the final result (as an .m4a file) and lets you lot send it via email, fix to be played anywhere.*


• Share on an external service : let'south y'all upload your vocal to Soundcloud, iCloud or Dropbox account.*

* These features crave an n-Rail subscription or the Pro version of the app.

Re-performs the last action you lot cancelled via undo.

Re-performs the terminal action you cancelled via disengage.

Lets you add a blank audio, midi, instrument or step sequencer track.

View or hide the mixer, where yous tin control levels, pan, effects and routing of each track in your project.

Opens the screen midi keyboard to start play your virtual instruments.

Opens the screen pulsate controller to play drums and percussional virtual instruments with your fingers.

Track bar

The track bar contains the command commands of a specific runway, like mute, solo, arm button, monitor live input push button, pan, channel output, and channel insert effect panel.

Locks the track zoom at the dimension you ready earlier enabling this function.

Lets you choose the track'south input and enables/disables information technology for recording.

Lets you listen to the incoming bespeak through the selected output destination. Note: make sure you have headphones or your output volume is sufficiently low to avoid feedback.

Sets the runway'south level. This is the same equally moving the rail's mixer slider.

Sets the channel's pan position (L/R positioning in the stereo field).

Sets the channel's output. Can be the master aqueduct, an Aux or group channel or another track.

Displays the agile insert furnishings for the selected channel. To add an effect simpy tap on information technology to open the event browser.

The Fourth dimension Status window

The time condition window displays the projection's current time. Tap on it to cull the time display format and switch from 30fps to Chiliad:B:T

By borer on "showtime" or "finish" you can choose amongst unlike view and monitor your option start, lenght or end.

Editing widgets and the Edit carte

In n-Track Studio you lot'll find two means of accessing editing controls:

1. Waveform editing widgets

1. Waveform editing widgets

You tin can edit a office via the waveform editing widgets.

Tap and drag the top stripe on a part to motility in upward and down the timeline.

Tap and drag vertically to set the part's gain level.

Tap and drag to fade in or out the part's volume.

Dragging will shorten or lengthen the audio or midi role. Lengthening the office to more than it'due south full size will loop the function.

Mutes/unmutes the selected part.

2. The Edit bill of fare

To open it, tap on a role'south waveform

Copy the part to the clipboard.

Cuts the part and copies it to the clipboard.

Pplit the part using the fourth dimension axis bar or piece the current selection into a new role.

Lets you transport the selected part to other devices or apps.

Copies the selected part into the clipboard.

Pastes a office from the clipboard.

Minimizes the channel peak, or expands it back to its previous height.

Clones the selected track.

Once enabled, dragging will let you stretch the part while persevering the sound's pitch.

Opens the part properties and the transpose role tool.

The Grid

The grid icon shows or hides the grid. By enabling the grid you'll be able to choose among different grid parameters (Measure, Beat, Eight, Sixteenth, 32nd, 64nd, 128th).

Enable snap to filigree: If this choice is checked, the pick and the parts offsets (when dragging with your finger) will snap to the nearest filigree line.

Selecting tracks to view

In some cases, showing or hiding different kinds of tracks could exist useful. You lot can set which rails type volition be visible or subconscious on the timeline past tapping the select tracks to view icon .

• Bear witness Groups: testify tracks you grouped
• Bear witness Instruments: show Instruments tracks added to your project
• Prove Aux Channels: testify Aux tracks added to your project
• Show Principal Chanels: show the principal channel of the project

Recording nuts

Recording your starting time audio track: Add together, Arm, Record

Allow's say we want to record an audio track. Outset of all, what we need to do is tap the add a blank track icon , then choose "add an audio track" to add a new, bare audio rail.

Before starting to tape, nosotros need to check the audio track is "armed". This means it has an input aqueduct assigned and is enabled for recording.

To arm a rail, tap on the arm icon . Here you can choose the input channel from which northward-Track should record sound.

If the project is blank, you can automatically start recording past pressing the record button on the transport bar. This activeness adds a bare armed audio rails and starts recording from your congenital-in microphone.

n-Track volition normally record from the device builtin microphone, from the headset mic (if a headset is connected), from an external mic or from an USB device connected via the Photographic camera Connection Kit.

At this signal, but selection up your instrument and push the record push button to start recording your offset sound track.

To stop the recording, simply tap the record button again.

Now tap the rewind push or movement the xanthous timeline cursor to the position yous want to start playback and push the play push to heed your creation.

If you desire to focus on a department, and listen to a single part of your take repeatedly, then yous demand to apply the Loop timeline selection. To use it, you demand to highlight an surface area past drawing with your fingers on the timeline axis, activate the loop office and tap the play button. due north-Track will now restart playback from the beginning of our selection as soon as the cursor reaches its end.

How to record a track over another one (overdub)

Let's say we want to record something over the first track. All we need is to add a new blank audio track and arm it, so nosotros tin can beginning recording.

And so, again, tap the Add a blank rails icon and choose "Add an audio rail".

If the rail is not armed, tap over the arm button and select the right input channel.

Since you desire to tape a 2d rail over the first audio track, you demand to be able to hear the first and the 2d runway together during recording, simply you want merely the second track to be recorded, so make certain the first track is unarmed.

To listen to what you're recording as you play it, you lot tin can tap the Monitor alive input button , which volition let you listen to the incoming signal through the selected output destination. Make sure y'all plug in your headphones so push the "Monitor live input" button to start listening to the incoming betoken. Yous can now record equally you lot hear what your mike is capturing.

Importing a base track to tape over

Let'southward say you desire to upload a base of operations track, backing track or instrumental, and then tape your voice or musical instrument over it.

All you need to exercise is tap the Card icon and select "Import sound file", then select the file you want to import into due north-Rail.

n-Rails will create a new sound track with the imported audio file, so we can now record over it. To record something over the imported track, only add together and arm a 2d audio track, then start recording.

Adding effects and editing audio parts

If we're satisfied with our performance, but nosotros want enhance or become artistic with the sound, nosotros tin add together an upshot.

Let's say we want to add a reverb to a vocal recording. Just use your fingers to zoom into the fourth dimension-axis view, until you run into the add effect panel.

Click on "add effect" and cull among the free integrated effects available in n-Track Studio.

The Grid and the Metronome

It's a common use to record songs by following a click track or metronome, and then apply the grid to align our recordings to the song's tempo.

You can select the bpm of your vocal by tapping the Metronome icon and selecting the bpm you lot need.

To actuate the metronome, switch it on with by tapping the power icon . Yous'll at present hear the metronome both during playback and recording.

To turn it off, just open the metronome and switch it dorsum off.

The grid part can be useful during editing, and in general when yous need a reliable tempo reference while working on your song. You tin can enable the grid by tapping on the "grid icon" .

Y'all can fix the grid time resolution by tapping the filigree settings window (run across the picture below).

Equally you can see there's as well a "Enable snap to grid" checkbox. If this is enabled, when we move audio and MIDI regions their start position volition be quantized to the closest grid value.

This can be useful if we're creating more electronic or loop based music. If you uncheck this box, but leave the grid on, then you lot'll exist free to move regions in whatever point of the timeline, and nonetheless use the grid as a useful tempo reference.

Using virtual instruments

Calculation virtual instruments

To add a new virtual instrument, just push the "Add together a bare track" button and select "Add an instrument". This volition create a MIDI track and an Instrument rails automatically assigned to the MIDI track created.

MIDI tracks volition incorporate the sequence of MIDI notes, besides equally other MIDI parameters, such as velocity. Instrument channels, instead, are where the bodily audio from the MIDI notes is generated. Multiple MIDI tracks tin can send their output to a single instrument channel.

The creation of a MIDI track will open up up the instrument browser, that lets you choose the virtual instrument you lot want to control via MIDI.

To change the MIDI rails instrument, simply tap the rails's output slot.

To immediately control our virtual instrument, tap the keyboard icon and start playing it with your fingers, or open up the pianoforte roll by tapping the icon. and first writing midi notes via the pianoforte ringlet's tools.

The Instrument browser

The instrument browser lets you cull the instrument you want to play via MIDI. It volition popup when creating instrument tracks, or when you tap on a MIDI runway'due south output slot, so y'all tin easily choose a new musical instrument or switch the sound on an already created instrument track.

The browser is organized in three sections:

• External instruments: Here you'll notice all supported third-party virtual instrument plugins available on your system.
• due north-Track instruments: In this section, you'll find a listing of north-Rails's built-in instruments. Instruments and patches which prove the download icon require an boosted download, which you tin launch via the Add together-on manager.
• MIDI outputs: shows the available hardware MIDI outputs, every bit well as already created instrument channels which yous tin send MIDI to, assuasive yous to route a new MIDI track to an instrument you already created.

When you select an instrument from the instrument browser, north-Track will create a new instrument channel with the instrument loaded upward, and assign it to a MIDI track.

If this is the first fourth dimension you open the instrument browser, yous may need to download additional instrument packs in order to have more choice than the few born sounds. Selecting the audio will bring up the Add-on manager, where we tin download content.

The Add-on Manager

The Add-on manager lets you download gratuitous and premium instruments, sounds and drumkits bachelor for utilize in n-Track.

Here y'all tin can download gratuitous and premium instruments, sounds and drumkits available for use in n-Track, which will be automatically once downloaded.

To download a sound, just tap on "Become". The sounds will then exist downloaded and automatically installed. Once installed, yous'll be able to play and record the instrument, and load information technology direct from the instrument browser.

Saving and Exporting

Saving projects

Saving a project means your project and all of its settings will exist saved in a format you can open exclusively in north-Runway (the .sng format).

To salve a project, just push the Menu icon and select "Save song". Y'all can and so re-open up your project at any time by selecting the "open song" option.

If y'all want to salve all the projection's settings and all of the project's files and assets, y'all tin can choose to relieve the projection as a "compressed Vocal" (sgw) file. Saving all project assets together with the projection would allow you, for instance, to open the project with all of its sound tracks in a different device running n-Track Studio.

Exporting songs

Exporting, or 'mixing downward' a rail means that all the tracks of your project will be bounced down to a single audio file, in the format y'all specify, like mp3, wav, and and so on.

Once mixed downwardly, your song will exist playable anywhere, but delight notation that exporting track, too as other features, are not bachelor in the free version. To export songs, y'all need to either pay for an northward-Runway subscription, or activate the full version, both of which you tin practice directly from the app.

Although you can't export to audio files, remember that in the free version y'all tin can freely upload the track to Songtree app, the complimentary music collaboration platform, and and so share it via a link.

To export your runway, tap the "bill of fare" icon and select "mixdown", so choose the format and the scrap rate, and so printing "ok".

Sharing your songs on Songtree

Songtree is a complimentary music collaboration platform that allows to interact with other musicians in building songs online. Songtree is developed by the same team behind n-Rails.

When someone uploads a song to Songtree, it becomes available for others to contribute to and build upon. Each contribution added by users creates a new version of the song, while the original song remains un-affected. Equally more people add together their contribution, a 'tree' of songs starts to take shape, with each contribution branching out from the original song.

Songtree is available every bit free spider web, iOS and Android apps. The apps allow you lot to record your performances directly from your device, besides equally letting you lot interact with other musicians via comments, likes, invites etc.

Songtree is fully integrated inside due north-Track Studio 8, and so that you tin can overdub other Songtree users songs without leaving due north-Rail.

On Songtree you can find other musicians to collaborate with, share ideas, or just jam with. To open Songtree but tap the "world" icon. Then click on the elevation left icon and select "login" to access your account or create a new one. You can also sign in with Facebook or Google and gain instant admission. We invite y'all to have a look at what's happening on Songtree, you may be surprised!

Working with Audio

In previous capacity, nosotros saw how to add and arm an audio track, how to record instruments or vocals, and how to upload a base track, or backing track, and record over it. Nosotros besides talked about editing parts and calculation effects.

In the following sections we'll give you some tips to obtain a better sound from your recordings because in fact, although we're working on a mobile app, all nosotros need is minimal extra hardware and a little extra cognition to make our recordings sound clear and professional.

Connecting your external audio bill of fare

As far every bit specific models become, you tin choose among many different solutions in many different cost ranges to fit your specific upkeep and needs.

To connect your external sound card, merely plug it to your device using the interface'south connector cable.

In one case plugged in, n-Rails will detect your device automatically. You're now ready to record. Merely brand sure that the recording input is set up to the soundcard input yous wish to record. You can do this via the arm button, as we saw in previous lessons.

If your soundcard hasn't been automatically recognized past due north-Rails Studio, delight use this form and let united states of america know.

Working with Inter-App sound

n-Track supports Apple Inter-app audio system, bachelor on iOS 7 and afterward. Like Audiobus Inter-app audio allows using 3rd political party apps equally plug-ins to generate or procedure audio. n-Track Studio three.ane allows using inter-app instrument and generator apps, that will act as audio sources and MIDI synths, generating audio which is then received and further processed inside due north-Rails.

When using an inter-app instrument, note that unlike with Audiobus you don't have to record the output of the instrument to a track, you can only keep it as an instrument, which will receive MIDI notes from n-Rail and convert them to an audio signal. When you're finished working on the vocal yous tin just mixdown the song and the audio from the inter-app instrument will automatically be included in the mixdown.

n-Rails Studio 3.2 and later besides allows using inter-app effects , y'all can only a 3rd party app as an effect to whatsoever track, group, instrument or master channel. Version 3.2 besides allows using due north-Rails equally a plug-in inter-app inside tertiary party host apps, n-Track can human activity as instrument, generator and effect.

Routing tracks

In some scenarios, you may wish to control a runway's routing options, significant the input and especially the output destination of the track's signal. This may be useful when, for instance, you lot want to grouping diverse tracks together to control their overall level or eq. Or, you may wish to record the output of diverse tracks into a new sound track, or perhaps transport the bespeak from various tracks to an issue.

You can control each track's input/o utput settings via the mixer. This is where you tin decide to road a track to another. For instance, apply a ship effect. Transport effects, as opposed to insert effects - which bear on the entirety of the rail's signal - let you lot, for instance, to have a single reverb result and ship different amounts of your tracks to it.

For example, let's apply a reverb to an audio track, offset as an insert effect, then equally a transport consequence.

To apply a reverb as an insert effect, all y'all demand to do is pick the event from the track's effects panel. This will let you choose an effect to utilize, which will affect the entire signal (or amend, the corporeality gear up past the dry and wet parameters) before passing information technology to the output.

You tin also add furnishings using sends. A send allows you to send a runway'southward point to an auxiliary track, which will exist the host of the insert effect. This allows you to send unlike tracks to the same result in different amounts, controlled by the send amount knob.

To add a send effect, open the mixer. So tap the add effect button or tap this piddling window and choose "add together new send".

Equally yous tin encounter, a new Aux runway was automatically added to your project. At present all nosotros need to do is add an effect on Auxiliary track. To do this, just tap the "add together effect" console of the Aux track and choose an effect. Nosotros'll give the reverb 100% wet and 0% dry indicate, since the dry out component volition be coming from our original track, and the auxiliary track volition but provide the bespeak with the effect applied.

Nosotros tin at present command the reverb amount using rails i's send knob.

Mixing a song

When yous mix a song, you lot're usually looking to make every element in your song be heard clearly and fit well with the other elements, both as far as level and frequency content are concerned.

You tin can control each rails'southward level via the mixer sliders. For instance, if our bass is too tranquility compared to the drums and guitars we could bring up information technology's level.

Another affair to consider is the frequency content of the elements in the mix. Although this depends on the genre of music we're working on, on our artistic intentions, our taste and and so on, it's more often than not considered a good exercise to make sure that various sounds in your mix don't clutter a particular frequency band. For instance, we want the primary bass frequencies in our song to come from the bass guitar, rather than the guitar

Showtime of all open up the mixer view and tap the EQ icon of the channel nosotros want to modify, then starting time change frequencies. We might and so choose to employ a high laissez passer filter to the guitar to cleave out room for the bass frequencies to stand up out without interference from other low-end frequencies coming from the guitar, resulting in a clearer mix, in which nosotros can actually hear all the private elements more than clearly.

Working with MIDI

Previously, we had a look at how to add a virtual musical instrument rail, how to download virtual instruments for free and how to tape midi tracks. The objective of these following lessons is to bring you to next level of using MIDI for creating your music with n-Rail Studio.

In the previous lessons we learnt how to set upward our virtual instruments. This time we'll look at how to actually play or plan these instruments, whether past connecting controllers or past using the program's built-in tools and editors.

Playing MIDI instruments

Once y'all've added a new blank midi track and selected an instrument from the instrument browser, then you lot need to play information technology. n-Rails lest y'all do this in various differents means.

One way is using the built-in virtual keyboard, that yous can play immediately, via touch gestures on your device. To open the virtual keyboard, simply tap the "keyboard" icon on the track bar and start playing.

Lets you expand the keyboard view or duplicate it and playing with two keyboard.

Lets you scroll the keyboard octaves..

Tap this icon while playing notes to sustain them.

Locks the sustain virtual pedal.

Holds the last note played.

Opens the screen keyboard settings.

Using the screen drum controller

Some other congenital-in controller is the drumkit controller.

Some drum or percussive virtual instruments loaded from the instrument browser will call upwardly this kind of controller, more advisable for playing these kind of sounds.

To open the pulsate controller, simply tap the "drums icon" . You lot tin can now play the kit'due south elements by using your fingers. You should notice that in this "acoustic" view, some kit elements trigger different sounds depending on the surface area you hit.

There is besides a more than "electronic" layout, which features drum 'pads', similar to those you would find on a hardware controller or drum machine.

To change the instrument we're controlling, simply tap the instrument name on the top middle of the screen.

Using the step-sequencer

A peachy tool to write midi sequences or create rhythms is the footstep sequencer. The step sequencer lets you compose rhythms and songs using smaller pieces - called patterns - as the edifice blocks for more than complex scores.

To open the step sequencer, click "add blank track" , and then "add step sequencer track".

We tin run across the step seq in full screen past clicking this icon Now, write your sequence, and and then striking play. We can add or remove steps from our sequence with the "add step" button or "delete step" button .

Select the destination instrument

Now lets enable the pattern view by tapping this icon

Each pace sequencer track can operate in i of 2 modes:

• In freerun mode the currently displayed pattern will exist played indefinitely in loop. This mode is useful for testing ideas, practicing, jamming and live performing.
• In playlist mode you tin assemble a customized sequence of patterns. This is especially useful for composing songs with different sections (eg: verses, choruses, fills).

Y'all can switch between the two modes at any moment, using the mode selector.

Creating a gratuitous-running pattern

While in freerun fashion, create a new pattern in the design roster, tapping on the add button

The pattern roster contains all the available patterns for the track, you can think of information technology equally a toolbox filled with rhythms gear up to be used.

Later on creating several patterns in the roster, you tin switch among them clicking on the desired one. If the song is playing, y'all will immediately hear the new pattern right after selecting it.

Adding notes to a pattern

To add notes to the currently selected blueprint, tap on a cell in the pattern's annotation filigree. The cell volition light up and the corresponding note will play when the progress cursor crosses information technology.

The notation for the cell's row is indicated in the notation list, on the left side of the grid.
Tap on the note's button and drag vertically to alter its velocity. The button's low-cal volition dim reflecting the velocity level.

Creating a playlist

Switch to playlist way: from at present on, patterns in the roster will not exist played when you create or select i of them. Only patterns added to the playlist volition play in sequence.

To add a blueprint to the playlist, click on the button while the desired design is selected, or drag the desired design from the roster to the playlist.

Yous can arrange the patterns' ordering in the playlist at any moment, dragging them where desired.

When playback is activated, the playlist will be reproduced, following the principal vocal time position.

To remove a pattern from the playlist, select it and click the button. The removed pattern will notwithstanding be available in the roster for reuse.

Setup blueprint backdrop

The main settings brandish shows the most important properties of the selected pattern

Shows the pattern'south name. Click on the name to alter information technology.

Shows the number of time steps for the selected pattern. Click on the arrows to change information technology.

Indicates the time altitude betwixt each stride, and the base duration of each step (the duration can be modified for each step independently, meet [Notes duration]. The length is expressed in musical notation.

Indicates the runway you lot are working on. Click to select a unlike track.

Indicates the play speed in BPM. This is a global setting (not specific to the design), mirroring the one in the chief toolbar.

A pattern with 16 steps of 1/8 duration each will last the same as a 32-step pattern with i/16 long steps. If you want more control on the position in times of the notes, try selecting a smaller footstep length.

Permanently deleting a pattern

To permanently delete a pattern, click on the push while the pattern is selected. When a blueprint is removed from the roster, it will be permanently removed from the playlist as well, if present there.

Cloning a pattern

Clicking on the button, the currently selected design is copied and a new identical blueprint is added to the roster. This is useful to start working on a new pattern that is a variation of a previous one. The modifications performed on the new pattern will not affect the original one.

Notes duration

By default, each note has the aforementioned length equally the time separation between note-on events.

If you need a note to be played for a longer or shorter time, modify the duration value in the note elapsing row.

Making a notation longer than the step length easily allows for overlapping notes arpeggios.

A few things to keep in heed:

• The duration of the annotation is proportional to the footstep length
• The selected elapsing volition affect all the cells belonging to the aforementioned column
• lengthening or shortening a step will not touch on the position in time of the following pace

Customizing notes list

Each pattern's note filigree can take a customized number of rows, each one representing a pitch value. To add or remove rows from the pitch list, click on the buttons.

You tin can transpose the note list - and thus the pattern - clicking on the buttons, and y'all can even prepare a custom note for each row, clicking on the button and selecting the notation from the resulting menu.

From the same bill of fare yous can select one of the alternate namings available for the note listing.

Yous can besides load specific scales in the midi list, to ease the composition procedure. Just click on the scale button, and select a major, small or other blazon of calibration in the desired key from the menu. Click on Advanced to fully command all aspects of the calibration generation.

Blueprint color

To alter the color of a blueprint, right-click on it in the roster and select the desired color from the Color sub-carte du jour.

Using the Piano-coil

You tin can also use the piano-curlicue to write your MIDI parts. The Pianoforte Roll window shows the MIDI events occurring in the track. The most common events are notes, simply other types of events (controller commands, pitch bends, etc.) can be displayed and edited in the same manner as notes.

To open the piano curl simply tap on this "vertical" piano icon .

To write MIDI parts simply select the "note" icon and start cartoon with your finger. If you need to edit the notes in your sequence, you can use the editing widgets to move, delete notes and and then on.

A cardinal part of composing MIDI, and in fact useful to make your sounds less mechanical or robotic and pheraps a piddling more than human being, is to edit the notes velocities, which represent the intensity with which the notes were pressed.

To edit velocities, you can utilise the surface area below the MIDI notes editor and draw the velocity bend you're looking for.

You tin can also cull to draw Pitch bend curves or curves for other controller parameters, such as the mod cycle.

If your projection has more than 1 MIDI rails, then you'll run into the other tracks in this area of the piano ringlet. Here yous can hands switch to a different rail or decide to show and control more tracks in this same piano roll window.

Connecting an external midi keyboard

If you prefer the feel of an actual keyboard, y'all might adopt to play an external MIDI controller.

If y'all're using a more common USB connectedness, all you need to do is connect it to your device and n-Track should automatically recognize information technology.

To connect a bluetooth keyboard (or bluetooth headphones), you need to beginning pair it to your device. You lot can do this in your device settings/bluetooth past selecting your keyboard. Once paired to your device, when you launch n-Rail the app should find your keyboard and ask you whether you lot want to utilise it.

Using AU instruments in n-Track

If you lot have third-party instruments you wish to utilize in due north-Track, you'll observe these in the 'external instruments' tab in the instrument browser. As you'll see due north-Rails volition automatically find all AudioUnits, including instruments in the newest AudioUnit3 format, and fabricated them available for immediate utilise.

Once selected northward-Track opens the musical instrument and the keyboard in this nice sort of splitted view, so information technology'southward really easy to control your external sound unit of measurement without interrupting your workflow.

Using audiobus to connect to other musical apps

Let's have a expect at how to connect n-Track to other musical apps via Audiobus.

First of all, open up AudioBus. Once open, select the instrument y'all want to play from the 'input' slot and pick 1, for example the iMini synth. Once audiobus loaded the musical instrument, tap on its icon to launch information technology.

Every bit y'all tin run across, apps loaded via audiobus show a piffling menu on the correct of the screen, from which we can return to audiobus with just a click.

At present load n-Track Studio in the audiobus 'output' slot.

Now, let's become back to n-Track. If there isn't one, add together a blank audio rails, then assign the 'iMini', or whatever audiobus input, every bit the input of the track. Now let's become back to audiobus, and open the iMini interface.

As you lot tin come across, the audiobus menu on the right now shows n-Rail'south ship controls. To record sound from the iMini, simply select 'record', then play something.

By switching back to n-Rail, nosotros can see that the sound coming out of the iMini is being recorded into our newly created audio track.

Video tutorials

toddleck1974.blogspot.com

Source: https://ntrack.com/ios-multitrack-manual.php

Share this post